Ultra Reef Drain System
Drain System
- charge and discharge are interchangeable at any time
- with 3 Silicone O-ring gaskets
- system can be disassembled in every single component
- easy and thorough maintenance
- Manufacturer:Ultra Reef
The experience gained in more than half a century in the field of fluid dynamics has made it possible for Ultra Reef to offer a product with the following characteristics:
Modular designThe modular system allows you to compose your own system using a single drilling diameter in the glass, making it possible to swap the charge and discharge at any time. In fact, our system uses the same diameter of pass-glass for both systems making it possible to subsequently add a further charge or drain without being bound by the original arrangement.
No glue neededAll components are assembled by means of threaded connectors and seals and can be completely disassembled to facilitate maintenance and avoid losses due to defective bonding. Moreover, having the thread made on the screwed components inside the tank, it will be possible to remove the system without having to move the aquarium if it is mounted close to a wall.
Triple O-ring sealingOur system uses a sealing system made with 3 silicone O-ring gaskets. This solution allows waterproof sealing without the need to tighten the components, avoiding dangerous forces on the glass plate. Disassembly can be done by hand at any time and you will not have to use teflon tape or silicone paste to reassemble the system.
Charge technologyThe charge system is equipped with nozzle on spherical support with adjustable attack which can be rotated and bent at will. The threaded connection is compatible with commercial nozzles and can be replaced with any fitting with thread 1/2" or 3/4? (according to size).
Drain technologyThe drain system is equipped with removable grid to facilitate cleaning operations. The increased size of the grid help the flow of water ensuring flow rate and silent running. The grille is machined with side openings to prevent it from being completely occluded from flat objects.
Easy and thorough maintenanceOur product can be disassembled virtually in every single component. The generous thicknesses of the materials used ensure excellent resistance during all maintenance, while small component reduction facilitates cleaning and replacement of individual worn components.
Water Intake: | U-40: 700 - 1.200 l/h |
Glass Thickness: | 0 - 24 mm |
Length: | U-40: 7 cm |